Duikmateriaal

EVOLUTION BECOMES REVOLUTION – DESIGN YOUR PERSONAL DRYSUIT

The Argonaut 3.0 is available in a choice of fabrics and colours that maximise flexibility and durability. Choose from the colour options for torso and legs to see how your suit could look.Only available made to measure for the perfect fit and function.

Reconfigured zipper
Running from right shoulder to left hip for improved gas management and comfort

Articulated for trim
New leg design allows perfect fit and freedom of movement when diving in trim

Redesigned telescopic torso
Allows maximum range of movement with increased flexibility

Self adjusting warm neck collar
New warm neck design allows easier fitting of hoods and adjusts to give a snug fit for latex and neoprene neck seals only
 

Fabric Options

– Stealth (Nylon) Trilaminate
– Flex (Polyester) Trilaminate -> black top and black legs
– Stealth Hybrid (Nylon/Polyester) Trilaminate

Opting for our Stealth fabric means lightweight but hardwearing protection. The combination of stretch and lightweight durability gives unparalleled freedom of movement during your dive.

Our Flex fabric is specially engineered for durability and comfort to create a rugged suit. Originally designed for military use, the fabric is laminated with a flexible butyl layer to provide protection without becoming rigid.

The two fabrics can be combined to form our ‘Stealth Hybrid’ suit with Stealth on the top and Flex on the lower half to provide outstanding mobility and durability.

Boot Options

– ‘Standard’ 4mm Compressed Neoprene Boot
– ‘Tech’ 2.5mm Compressed Neoprene Boot
– 2.5mm Compressed Neoprene Sock

Choose from 4mm or 2.5mm compressed neoprene boots with reinforced heels and toes and velcro strap to secure your foot in place. Each features fin strap retainers and comes with ergonomic insoles for extra comfort.

The Standard Dry-boot is the more rigid and heavyweight of the two dry-boot options. It is well suited for shore-entry dives or for when terrain is rough.

The Tech Dry-boot has less vulcanised rubber, making it lighter-weight and more flexible and is particularly popular with divers likely to be performing more complex finning.

Alternatively you can opt for our 2.5mm compressed neoprene socks which allows you to wear your own choice of boot on top.

Wrist Seal Options

– Latex
– Neoprene
– Ellipse with replaceable silicone seals
– Ultima
– PSI
– Si-Tech QCP XL

Hard-wearing and inexpensive, latex seals are a popular choice for recreational and technical divers alike.

Our 3mm neoprene wrist seals are considered by some divers to be more comfortable than latex seals and stand up to abrasion well.

The Ellipse wrist system uses silicone seals and provides an easy solution for dry gloves. Designed by fourth element and manufactured by Si-Tech. The seals can be easily swapped out enabling quick repairs. If you wish to wear drygloves, please select the ‘Ellipse Dryglove Attachment’ option.

Machined from anodised aluminium to protect against corrosion, PSI, the premium dry glove system is designed to work with the Si-Tech PU suit ring to allow a quick and easy change of silicone wrist seals. The glove-to-suit sealing o-ring seals confidently with little effort thanks to a user-friendly colour coded bayonet lock.

The Si-Tech QCP XL (Quick Cuff Platform) is only recommend for divers with large hands, who may struggle to get their hands through the oval ring of the Ellipse system. Using larger, round rings, the Si-Tech QCP XL system also has the benefit of easily replaceable silicone seals.

Neck Seal Options

– Latex
– Neoprene
– Si-Tech Silicone Neck System

Latex neck seals are hard-wearing and inexpensive, these are a popular choice for recreational and technical divers alike.

Our 3mm neoprene neck seals are considered by some divers to be more comfortable than latex seals and stand up to abrasion well.

The Si-Tech option utilises the Quick Neck System. The more flexible ring offers greater comfort and ease of movement with the added benefit of being able to change out silicone seals quickly and easily. A Si-Tech combi-tool is included.

Valve options

– Si-Tech
– Apeks
– Apollo

Choose from the Si-Tech ‘Shell’ inflation valve and ‘Argo’ dump valve, or the low profile Apeks Swivel valve with Seatec inflation nipple and automatic dump valve.

You can also specify a DIR/GUE exhaust valve placement where the exhaust valve sits further back on the arm to allow easier dumping of air when in horizontal trim with arms forward. This option is not recommended for divers with limited arm or shoulder mobility.

Our new Apollo ‘Bio valves’ are Japanese-made and offer a unique exhaust valve mechanism, allowing intuitive dumping of air even when wearing thick drygloves.

Pocket Options

– Two
– One (left or right)
– None

Two generous pockets are included as standard with each Argonaut drysuit. Each pockets contains two bungee loops inside the main pocket along with a wetnotes sleeve and a D-ring. The outer zipped mini pocket contains two further bungee loops.

You can opt to have just one or no pockets. At 3.5l volume per pocket, Argonaut pockets are one of the biggest pockets offered on the market.

P-Valve Options

– Si-Tech
– Light Monkey
– Halcyon

The Si-Tech is a balanced, pressure compensated p-valve. Its design is simple and easy to clean. It is very low profile at less than 2cm high when mounted to the drysuit.

Machined from solid Delrin®, the Light Monkey p-valve is a robust, balanced p-valve with engraved fourth element logo. It comes with a ‘quick disconnect’ to aid quick and easy changes.

With a solid Delrin® body, the Halcyon Streamline p-valve is a robust, balanced p-valve allowing easy operation, even when wearing drygloves.

You have the choice of fitting your p-valve on the left or right leg.

Incorporating highly advanced thermal technology and one of the most insulating materials ever developed, the HALO A°R’s performance exceeds expectations of any diving undersuit.

Using technology originally created for space exploration and cryogenics, the HALO A°R features the extreme insulation material A°RGON™ aerogel in a compression resistant matrix.

With phenomenal insulation properties, this material enables the HALO A°R to achieve extreme thermal protection from a thinner, less buoyant diving undersuit. With a wind and water-repellent stretch outer layer, comfortable thumb loops and foot stirrups, this is a garment which can be worn in total comfort, all day.

Building on fourth element’s experience in thermal protection and bodymapping, the HALO A°R was assessed with thermal imaging cameras to improve and modify prototypes.

The offset chest zip and baffles ensure that heat lost from the torso is minimised when in horizontal trim. All the body from shoulders to knees is protected by a layer of A°RGON™, while other critical areas also benefit from this enhanced insulation without compromising mobility or creating bulk.

Routing a valve in this diving undersuit is as simple as adjusting the two-way zipper in the fly and a zippered pocket provides a secure place to store keys, credit cards and cash.

Incorporating highly advanced thermal technology and one of the most insulating materials ever developed, the HALO A°R’s performance exceeds expectations of any diving undersuit.

Using technology originally created for space exploration and cryogenics, the HALO A°R features the extreme insulation material A°RGON™ aerogel in a compression resistant matrix.

With phenomenal insulation properties, this material enables the HALO A°R to achieve extreme thermal protection from a thinner, less buoyant diving undersuit. With a wind and water-repellent stretch outer layer, comfortable thumb loops and foot stirrups, this is a garment which can be worn in total comfort, all day.

Building on fourth element’s experience in thermal protection and bodymapping, the HALO A°R was assessed with thermal imaging cameras to improve and modify prototypes.

The offset chest zip and baffles ensure that heat lost from the torso is minimised when in horizontal trim. All the body from shoulders to knees is protected by a layer of A°RGON™, while other critical areas also benefit from this enhanced insulation without compromising mobility or creating bulk.

Routing a valve in this diving undersuit is as simple as adjusting the two-way zipper in the fly and a zippered pocket provides a secure place to store keys, credit cards and cash.

Incorporating highly advanced thermal technology and one of the most insulating materials ever developed, the HALO A°R glove’s performance exceeds expectations of any diving glove liner.

Using technology originally created for space exploration and cryogenics, the HALO A°R gloves feature the extreme insulation material A°RGON™ aerogel in a compression resistant matrix.

A°RGON™ is a form of Aerogel developed for insulation in space crafts and cryogenics due to its superior insulation properties. Traditionally this material is created by removing the liquid from a gel and replacing it with air, which creates a lightweight, hollow and flexible structure. When we tested it more than 10 years ago it crushed and disintegrated. A°RGON™ is a foam embedded version of this which allows it to function in a diving context.

With phenomenal insulation properties, this material enables the HALO A°R gloves to achieve extreme thermal protection from a thinner, less buoyant diving glove. With a wind and water-repellent stretch outer layer, this is a glove which can be worn in total comfort, all day.

A°RGON™ insulation is placed throughout the glove for enhanced insulation without compromising mobility or creating bulk.

Probably the world’s best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by fourth element, the One Piece Arctic provides a simple solution to the challenges of thermal protection.

Elasticated waist band for extra comfort
Low, front zip for easy donning
High recycled content: Outer: 80% Recycled Polyester. Inner: Fleece 100% recycled polyester
Contemporary flexible, metallic branding
Hand Warmer Pockets
High wicking
Low bulk, high insulation
Pee-valve ready
Thumb loops and foot stirrups to aid donning
Single layered lower legs reducing bulk around the ankles

Probably the world’s best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by fourth element, the One Piece Arctic provides a simple solution to the challenges of thermal protection.

Elasticated waist band for extra comfort
Low, front zip for easy donning
High recycled content: Outer: 80% Recycled Polyester. Inner: Fleece 100% recycled polyester
Contemporary flexible, metallic branding
Hand Warmer Pockets
High wicking
Low bulk, high insulation
Pee-valve ready
Thumb loops and foot stirrups to aid donning
Single layered lower legs reducing bulk around the ankles

The Arctic’s two layers of high insulation and low bulk fabric ensure exceptional levels of thermal protection.

Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer-fitting neoprene drysuits. In a layering system, the Arctic is also suited for use underneath membrane and trilaminate suits.

Using a combination of fastwicking, high insulation fabrics, the Arctic creates a micro-climate around the diver, keeping the body dry and warm. A high density inner fleece provides superior insulation, with maximum comfort and wicking, whilst the outer layer, which has a water-repellent finish, ensures a snug fit.

The Arctic requires less loft to perform due to more effective management of air which is held in the fibres of the suit. Instead of maximising the thickness of the layer of air near the skin, the Arctic minimises the movement of air within, reducing the rate of cooling without any risk of trapping the air and preventing its release from the dump valve.

The Arctic retains a significant degree of its thermal performance when wet, such that wearers have found it possible to complete dives in relative comfort after even the most fundamental drysuit failures. In some cases, divers have not noticed a leak in a neck or wrist seal until after the dive, such is the performance of the fourth element Arctic.

Backed by years of field testing by the Norwegian Navy, the British Antarctic Survey Dive Team, the French Marines and the Danish Navy, the Arctic was designed using high technology fabrics and has been tested in real diving conditions from the Arctic to the Antarctic.

DESIGNED TO BE LIGHTWEIGHT AND FLEXIBLE

The X-Mission is ideal for the advanced technical diver, or the recreational diver who wants the best combination of flexibility and durability in a travel friendly package. This innovative drysuit uses our most advanced materials and construction methods, designed and purpose-built by our design team in partnership with members of a technical cave dive team to meet their demanding requirements. The lightweight and durable Nylon RipStop material is perfect for high abrasion resistance in the water and on the surface and, packs perfectly for travel.

DESIGNED TO BE LIGHTWEIGHT AND FLEXIBLE

The X-Mission is ideal for the advanced technical diver, or the recreational diver who wants the best combination of flexibility and durability in a travel friendly package. This innovative drysuit uses our most advanced materials and construction methods, designed and purpose-built by our design team in partnership with members of a technical cave dive team to meet their demanding requirements. The lightweight and durable Nylon RipStop material is perfect for high abrasion resistance in the water and on the surface and, packs perfectly for travel.

The Bare Aqua Trek Evo Tech Dry is a lightweight drysuit made of breathable material with better flexibility than the current butyl trilaminate drysuits.

• Slim ‘cave cut’ design with anatomically shaped torso, arms and legs eliminates excess material for better freedom of movement
• Adjustable elastic waistband on the back for the perfect fit
• YKK Aquaseal® drysuit zipper on the front
• 3mm neoprene comfort-fit neck seal and 2mm nylon collar with drain
• Compact adjustable purge valve
• Strong 2-needle felled seam construction
• Elastic crotch-strap with ‘anchor’ attachment and adjustable QR buckle
• Reinforced at critical welding points
• Pre-installed suspenders attachments and 4-point suspenders
• Large lockable pocket on left leg
• HD Bottleneck latex wrist seals
• M-PADz durable knee pads with 2mm neoprene padding
• 360° rotatable inlet valve
• Compression resistant tech boot with strap
• Comes standard with Bare Elastek cap, MD hose and dry pack bag

The Bare Aqua Trek Evo Tech Dry is a lightweight drysuit made of breathable material with better flexibility than the current butyl trilaminate drysuits.

• Slim ‘cave cut’ design with anatomically shaped torso, arms and legs eliminates excess material for better freedom of movement
• Adjustable elastic waistband on the back for the perfect fit
• YKK Aquaseal® drysuit zipper on the front
• 3mm neoprene comfort-fit neck seal and 2mm nylon collar with drain
• Compact adjustable purge valve
• Strong 2-needle felled seam construction
• Elastic crotch-strap with ‘anchor’ attachment and adjustable QR buckle
• Reinforced at critical welding points
• Pre-installed suspenders attachments and 4-point suspenders
• Large lockable pocket on left leg
• HD Bottleneck latex wrist seals
• M-PADz durable knee pads with 2mm neoprene padding
• 360° rotatable inlet valve
• Compression resistant tech boot with strap
• Comes standard with Bare Elastek cap, MD hose and dry pack bag

Stretch, ademend en drukvaste fleece gemaakt van polyester/spandex.

Anti-microbieel met Polartec power stretch ®-technologie.

Exclusief ontworpen, de eerste fleece voor gebruik onder een droogpak.

Compressie bestand fleece vervangt het gebruik van een wolletje.

High-stretch fleece vermindert bulk en lood eisen.

High warmth-to-weight ratio delivers the exact warmth and breathability.

Moisture Management Technology voert vocht af, weg van de huid.

Bevat sneldrogende kenmerken voor een snelle verdamping.

Anti-microbiële eigenschappen die de groei van bacteriën remmen.

Ontworpen voor gebruik met SB-systeem droogpak of als stand-alone.

Pull-over eigenschappen:

• Geen overtollig materiaal wat de bewegingsvrijheid beperkt
• Passende kraag geeft extra warmte en voorkomt opstropen
• Stretch zak met ritssluiting op de rechter bovenarm voor sleutel of ID
• Duimlussen vergemakkelijken het aantrekken
• Onderkant is dunner zodat er minder bulk ontstaat bij overlapping

Broek eigenschappen:

• Elastische broekband met koord en stopper
• Rits sluit naar beneden. Eventueel voor gebruik van een Pee-valve
• Stretch zak met ritssluiting op rechter dijbeen voor sleutel of ID
• Lycra hielbanden houden de broekspijpen op zijn plaats

Stretch, ademend en drukvaste fleece gemaakt van polyester/spandex.

Anti-microbieel met Polartec power stretch ®-technologie.

Exclusief ontworpen, de eerste fleece voor gebruik onder een droogpak.

Compressie bestand fleece vervangt het gebruik van een wolletje.

High-stretch fleece vermindert bulk en lood eisen.

High warmth-to-weight ratio delivers the exact warmth and breathability.

Moisture Management Technology voert vocht af, weg van de huid.

Bevat sneldrogende kenmerken voor een snelle verdamping.

Anti-microbiële eigenschappen die de groei van bacteriën remmen.

Ontworpen voor gebruik met SB-systeem droogpak of als stand-alone.

Pull-over eigenschappen:

• Geen overtollig materiaal wat de bewegingsvrijheid beperkt
• Passende kraag geeft extra warmte en voorkomt opstropen
• Stretch zak met ritssluiting op de rechter bovenarm voor sleutel of ID
• Duimlussen vergemakkelijken het aantrekken
• Onderkant is dunner zodat er minder bulk ontstaat bij overlapping

Broek eigenschappen:

• Elastische broekband met koord en stopper
• Rits sluit naar beneden. Eventueel voor gebruik van een Pee-valve
• Stretch zak met ritssluiting op rechter dijbeen voor sleutel of ID
• Lycra hielbanden houden de broekspijpen op zijn plaats

Ultrawarmth Base Layers increase thermal energy, provide more endurance and faster recovery thanks to Ultrawarmth Omnired® Technology embedded in the fabric of the material. Base Layers are available in men’s and women’s top and pant, making them essential to a diver’s drysuit system and ensuring ultimate warmth in all cold conditions.

FORM-FITTING DESIGN.

Designed to provide more warmth with less bulk, the Base Layer pattern is a form fitting design. It improves comfort under all BARE drysuits by eliminating the bulk that often comes with excess material. Our 3D patterning results in the perfect fit for both men and women.

BREATHABLE FABRIC

Advanced stretch-breathable fabric draws moisture away from your body and creates a dry zone, next-to-skin barrier. Moisture is dispersed over a larger surface for quick evaporation. 230-g Omnired® stretch fleece fabric has a smooth face for easy layering, and a fleece-brushed back for superior warmth and moisture-wicking performance with Microban odor control.

MIX AND MATCH

The versatility of Ultrawarmth Base Layers allows you to mix and match the top and pant with any drysuit system for men and women. Base Layers are the only drysuit undergarment in the industry with scientifically-validated and FDA-determined Ultrawarmth Omnired® Technology, all while maintaining BARE’s exceptional standards of Fit, Craftsmanship and Innovation.

Ultrawarmth Base Layers increase thermal energy, provide more endurance and faster recovery thanks to Ultrawarmth Omnired® Technology embedded in the fabric of the material. Base Layers are available in men’s and women’s top and pant, making them essential to a diver’s drysuit system and ensuring ultimate warmth in all cold conditions.

FORM-FITTING DESIGN.

Designed to provide more warmth with less bulk, the Base Layer pattern is a form fitting design. It improves comfort under all BARE drysuits by eliminating the bulk that often comes with excess material. Our 3D patterning results in the perfect fit for both men and women.

BREATHABLE FABRIC

Advanced stretch-breathable fabric draws moisture away from your body and creates a dry zone, next-to-skin barrier. Moisture is dispersed over a larger surface for quick evaporation. 230-g Omnired® stretch fleece fabric has a smooth face for easy layering, and a fleece-brushed back for superior warmth and moisture-wicking performance with Microban odor control.

MIX AND MATCH

The versatility of Ultrawarmth Base Layers allows you to mix and match the top and pant with any drysuit system for men and women. Base Layers are the only drysuit undergarment in the industry with scientifically-validated and FDA-determined Ultrawarmth Omnired® Technology, all while maintaining BARE’s exceptional standards of Fit, Craftsmanship and Innovation.

specification

The E.Lite+ Ladies First model is based on the exceptional quality of the E.Lite model, however, it has been supplemented with a new, flexible and soft to the touch fabric, which even further increases the comfort of diving. Critical points, particularly vulnerable to damage and abrasion, have been adequately protected with a durable E.Lite fabric, which was created exclusively for SANTI.

Innovative, feminine cut used in this model introduces lowered waist line and curved side gores that especially underline the feminine suit shape. E.Lite+ Ladies First protects exactly where it is necessary and at the same time guarantees exceptional mobility. The suit is equipped as standard with a hood N’11 or ‘7, produced from a very flexible neoprene.

The lightness and softness of the suit makes it perfect for travel. Its unique strength properties will satisfy even the most demanding cave and wreck divers. The suit is dedicated to heavy technical as well as recreational and sport diving.

Features:

• total weight with all equipment items (for size L) – 3.5kg
• material: Ripstop Nylon/Butylene/Ripstop Nylon 365-425g/sqm and Ripstop Nylon/Butylene/Polyester 515g/sqm,
• upper suit, upper front and back bottom legs made of elastic, light fabric 425g/sqm,
• back, elbows, lumbar area, the lower front of the legs are made of E.Lite fabric, 515g/m2.

In standard equipped with:

• colors: black / arctic blue / turquoise / scarlet / amber, side gores: gray,
• telescopic torso,
• waterproof zipper protected by an additional zipper closed with a plastic zip,
• reinforcements on the sleeves, legs and back,
• Apeks high-pressure outlet valve,
• Apeks inlet valve,
• SANTI SmartSeals® ring system for easy seals exchange,
• two thigh spacy, cargo pockets with elastic, rubber loops in feminine size,
• patches finished with artic blue or turquoise color touches on both pockets with a zippered “double ender” section,
• Kevlar® knee pads,
• Latex neck seal insulated with 3 mm Neoprene collar in gray color
• Flexsole boots,
• internal suspenders with a pocket,
• Hood ’11 or ‘7,
• Ladies First water repellent travel bag – gray,
• Ladies First afterdive beanie hat.

specification

E.Lite+ drysuit presents an optimal and advanced combination of durability and modern textile technology dedicated to extreme sports. The E.Lite+ model is based on the exceptional quality of the E.Lite model, however, it has been supplemented with a new, flexible and soft to the touch fabric, which even further increases the comfort of diving. Critical points, particularly vulnerable to damage and abrasion, have been adequately protected with a durable E.Lite fabric, which was created exclusively for Santi.

Both functionalities combined in a modern and elegant, maximally ergonomic cut ensure the highest comfort and convenience during the dive. E.Lite+ protects exactly where it is necessary and at the same time guarantees exceptional mobility.

The suit is equipped as standard with a new hood with an innovative cut, sewn from a very flexible neoprene. The outer shell is covered with jersey while the inner coating is of the “smooth skin” type. The new hood perfectly adapts to the shape of the head, it is easy to put on and take off, even after soaking. Very comfortable, does not compress. 

The lightness and softness of the suit makes it perfect for travel. Its unique strength properties will satisfy even the most demanding cave and wreck divers. The suit is dedicated to both heavy technical as well as recreational and sport diving.

Features:

• total weight with all equipment items (for size L) – 3,9 kg,
• material Ripstop Nylon/Butylene/Ripstop Nylon 365-425g/sqm and Ripstop Nylon/Butylene/Polyester 515g/sqm,
• upper suit, upper front and back bottom legs made of elastic, light fabric
• weighing 365-425g/sqm,
• back, elbows, lumbar area, the lower front of the legs are made of E.Lite fabric, 515g/m2.

In standard equipped with:

• colors: black / blue / gray / scarlet / arctic blue / turquoise / amber,
• telescopic torso,
• waterproof zipper protected by an additional zipper closed with a plastic zip,
• reinforcements on the sleeves, legs and back,
• Apeks high-pressure outlet valve,
• Apeks inlet valve,
• SANTI SmartSeals® ring system for easy seals exchange,
• two thigh spacy, cargo pockets with elastic, rubber loops,
• patches on both pockets with a zippered “double ender” section,
• Kevlar® knee pads,
• Latex neck seal insulated with 3 mm Neoprene collar,
• Flexsole boots,
• internal suspenders with a pocket,
• STAY DRY waterproof travel bag for drysuit – gray.

Artikelomschrijving Santi Emotion Plus Ladies First Droogpak

The Santi E.Motion+ Ladies First drysuit presents optimal and advanced combination of lightness and flexibility from E.Motion drysuit and also comfort, fabric durability in the most sensitive areas.
The special cut was designed to emphasize the figure and details which add an attractive look. Both functionalities combined in modern and elegant cut provide the highest comfort while diving in different conditions and environments, using as well as recreational or technical diving equipment.

E.Motion+ Ladies First protects where necessary and at the same time ensures comfort of movement.
E.Motion+ Ladies First is available in unique and elegant colors, combining main colors: black, steel gray and silver with details in colors: fuchsia, lime or gray to emphasize your special choice.

E.Motion+ Ladies First comes in standard with the new innovative SANTI Smart Seals® – soft rings that allow you to easily and quickly replace your wrist seal for any preferred.

Features:

• total weight – 3,2 kg,
• fabric Ripstop Nylon / Butylene / Polyester 235 gr/sqm and 535 gr/m2.

In standard equipped with:

• aquaseal zipper at the front, placement from the right shoulder to the left hip, covered by an additional plastic zip-fastened flap,
• 7/9 mm Neoprene hood type collar,
• latex neck seal insulated by 3mm Neoprene collar,
• Apeks inlet valve,
• high-profile Apeks outlet valve,
• two big and functional cargo pockets on thighs with bungee strings (right pocket
• with a partition for wet notes,
• right pocket have a useful additional zipper fastened pocket for double ender,
• system of rings SANTI Smart Seals® with wrist seals provides easy exchange,
• internal suspenders with handy pocket,
• Flexsole boots,
• Kevlar® knee pads,
• medium pressure hose 75 cm,
• Ladies First water repellent travel bag,
• Ladies First afterdive beanie hat.

The Santi E.Motion+ drysuit comes as optimal and ultimate combination of lightness and flexibility from E.Motion drysuit and E.Lite fabric exclusive durability. Both functionalities combined in modern and elegant cut provide the highest comfort while diving.

E.Motion+ protects you where necessary, keeping the mobility during demanding decompression dives at the same time. E.Motion+ is also a perfect choice for beginners in recreational diving who appreciate highest comfort of the first moments spent underwater.

E.Motion+ design is based on the two flagship models: E.Motion and E.Lite, combining the greatest advantages of the used cut and fabrics to provide maximum protection at neuralgic places exposed to possible damage and best diving ergonomics. E.Motion+ is available in 36 color options that allow you to create a unique and elegant version of drysuit according to your own preferences.

E.Motion+ is equipped in standard with a new, innovative SANTI Smart Seals® system – soft rings that allow on very easy and quick exchange for any seals you freely preferred or have
at hand.

Features:

• total weight – 3,9 kg,
• fabric Ripstop Nylon/Butylene/Polyester 235 gr/sqm and 535 gr/m2,
• top part of drysuit and top front of trousers made of flexible fabric Ripstop of 235 gr/m2,
• back of the trousers, crotch pad, lower part of front trousers, elbows, belly and lower back area are made of E.Lite fabric of 535gr/m2

. 

In standard equipped with:

• grey chest, silver side gores, red piping
• aquaseal zipper at the front
• placement from the right shoulder to the left hip plastic zipper covered by an additional
• zip-fastened flap
• latex neck seal insulated by 3mm Neoprene collar
• 7/9 mm Neoprene hood type collar
• Apeks inlet valve
• high-profile Apeks outlet valve
• Kevlar® knee pads
• system of rings SANTI Smart Seals® with silicone wrist seals provides easy exchange
• two big and functional cargo pockets on thighs with bungee strings (right pocket
• with a partition for wet notes and two smaller metal D-rings)
• both pockets have a useful additional zipper fastened pocket for double ender,
• internal suspenders with handy pocket
• Flexsole boots
• medium pressure hose 75 cm
• STAY DRY travel bag – water repellent

Flex190 is een geweldig onderpak voor degenen die een kwalitatief onderpak willen met maximale beweeglijkheid. Perfect voor duiken in wateren van 7 tot 14°C.

Met de revolutionaire, gepatenteerde isolatie biedt Flex190 het meest innovatieve lente/zomer duikonderpak ooit. Het is gemaakt van ademende stoffen voor een grote flexibiliteit. Moderne technologie maakt het mogelijk om het onderpak in vier richtingen uit te rekken.

De 180g/m2 Climashield Contur® bestaat uit drie lagen – ademende isolatie Climashield Contur®, bedekt met een zachte polyester coating van binnen en buiten. Ook is de toplaag windafstotend.

Parameters:

• weefselsamenstelling met uitzonderlijke vierweg 
• gepatenteerde vezels maakt de isolatie zeer duurzaam 
• gewicht 180 g/m, warmte: 0,96 CLO,
• AquaBan™-technologie zorgt voor vochtafvoer van het lichaam – het onderpak blijft droog,
• gewicht: 1,5kg.
   

Functies:

• gemakkelijk te wassen en te drogen – wassen zorgt voor een nog betere thermische efficiëntie van de isolatie
• vijf praktische zakken (drie voor en twee achter)
• tweewegritssluiting voor P-valve
• verwarmingskabels gat in rechterzak
• zachte, katoenen manchetten met buikgaten om te voorkomen dat de mouwen omhoog komen
• brede elastische enkelbanden voorkomen dat de benen omhoog komen bij het opzetten van het droogpak
• versterkende patches op knieën en ellebogen gemaakt van polyester
• heerlijk zacht gevoel op de huid
• lichtgewicht en duurzaam
• 100% recyclebaar – deze unieke isolatie bevat geen acryl, waardoor het recyclebaar is
• praktische uitvoering van de ritssluiting (van rechterarm naar linkerbeen)
• innovatief, modern ontwerp
• het kan ook voor andere sporten worden gebruikt

Flex190 is een geweldig onderpak voor degenen die een kwalitatief onderpak willen met maximale beweeglijkheid. Perfect voor duiken in wateren van 7 tot 14°C.

Met de revolutionaire, gepatenteerde isolatie biedt Flex190 het meest innovatieve lente/zomer duikonderpak ooit. Het is gemaakt van ademende stoffen voor een grote flexibiliteit. Moderne technologie maakt het mogelijk om het onderpak in vier richtingen uit te rekken.

De 180g/m2 Climashield Contur® bestaat uit drie lagen – ademende isolatie Climashield Contur®, bedekt met een zachte polyester coating van binnen en buiten. Ook is de toplaag windafstotend.

Parameters:

• weefselsamenstelling met uitzonderlijke vierweg 
• gepatenteerde vezels maakt de isolatie zeer duurzaam 
• gewicht 180 g/m, warmte: 0,96 CLO,
• AquaBan™-technologie zorgt voor vochtafvoer van het lichaam – het onderpak blijft droog,
• gewicht: 1,5kg.
   

Functies:

• gemakkelijk te wassen en te drogen – wassen zorgt voor een nog betere thermische efficiëntie van de isolatie
• vijf praktische zakken (drie voor en twee achter)
• tweewegritssluiting voor P-valve
• verwarmingskabels gat in rechterzak
• zachte, katoenen manchetten met buikgaten om te voorkomen dat de mouwen omhoog komen
• brede elastische enkelbanden voorkomen dat de benen omhoog komen bij het opzetten van het droogpak
• versterkende patches op knieën en ellebogen gemaakt van polyester
• heerlijk zacht gevoel op de huid
• lichtgewicht en duurzaam
• 100% recyclebaar – deze unieke isolatie bevat geen acryl, waardoor het recyclebaar is
• praktische uitvoering van de ritssluiting (van rechterarm naar linkerbeen)
• innovatief, modern ontwerp
• het kan ook voor andere sporten worden gebruikt

Undersuit designed for women who value individuality and comfort even during long and demanding dives at temperatures less than 7 °C. Built on the experience of leading divers and instructors of recreational and technical diving. The modern, well-fitting and feminine cut is complemented by three color details that allows you to create the perfect combination of the Ladies First drysuit.

Making this model we used the best materials and available technologies. Thinsulate™ BZ400 Insulation is recommended by leading fabrics producers. Thanks to their effective insulation, resistance to moisture and breathability it is one of the best insulation which can be used in undersuits. It is compressed and do not take too much space under the drysuit, does not restrict the movement of the diver. It has a net layer, which makes the undersuit even more durable and practically indestructible.

Parameters:

• Thinsulate™ BZ400 Insulation,
• the lining: Micropolar weight 420 g/m˛, warmth: 1,80 CLO,
• the outside layer: Polyamide, Polyester,
• weight: 2,1 kg.

Features:

• details available in 3 colors: fuchsia, lime, grey,
• two large pockets on thighs,
• one inside pocket on the left chest,
• comfortable zipper opening flap on the bottom,
• tapes, which supply air to dry gloves,
• elegant and comfort collar and yoke covered with softshell,
• two-way zip,
• reinforcing patches on knees, shoulders and back made of Polyester,
• in waist-elastic gusset made of windproof fabric,
• shoulder gussets allowing more free movement,
• inside suspenders,
• wide (10cm) elastic ankle bands prevent moving up the legs when setting up the drysuit.

specification

Classic yet top of the list diving undersuit with the highest thermal protection available on the market. Undersuit BZ400X comes with modern and fit cut to increase your diving comfort and good looks. Dedicated for cold waters with less than 7°C temperature, it is ideal and unreplaceable for long deep diving, with decompression. Low water absorbing, high breathability features. Keeps a diver warm even if wet.

Thinsulate™ BZ400 insulation is recommended by 3M as optimal for diving undersuits due
to its thermal features and pre-compressed insulation.

Lining made of soft microfleece 140 g/m2. The outside layer made of Polyamide additionally
reinforced with Polyester fabric in the areas exposed to mechanical damage.

Parameters:

• Thinsulate™ BZ400 Insulation,
• weight 420 g/m2, warmth: 1,80 CLO,
• weight: 2,1 kg.

Features:

• breathable insulation,
• two side pockets,
• one inside pocket on the left chest,
• reflective tapes,
• rubber thumb loops, that supply air to dry gloves,
• elegant and comfort collar,
• two-way zip,
• reinforcing patches on knees, shoulders and back,
• in waist-elastic gusset made of windproof fabric,
• shoulder and knee gussets allowing free movement,
• inside suspenders,
• wide elastic ankle bands,
• specially designed p-valve and heating openings.

The SANTI BZ400 Heated Undersuit is designed as a part of the complex heating system consisting of at least an undersuit, SANTI Thermovalve or SANTI Connector and an external battery. This configuration allows a diver to wear the undersuit under the drysuit without dangers associated with internal batteries.

The heating undersuit outer shell is made of abrasion and tear resistant polyester Thinsulate™ 3M BZ 400 layer and micro fleece layer inside. The Heating undersuit is designed to be worn on top of thin form fitting thermal wear. It is not recommended to wear on naked body. In this configuration the majority of the heat output is transferred directly on diver’s torso, back and thighs.

Breathable Thinsulate fabric allows comfortable body heating and redirection of body sweat to the outside. Undersuit has high thermal properties even if it is switched off.

Available sizes:

XS, S, SL, M, ML, MLL, LS, L, LL, LLL, XLS, XL, XLL, XXLS, XXL, XXXL,
Made To Measure option available.

Technical info:

• maximum heating temperature 45°C,
• maximum heating power: 110 W,
• works with the following batteries:
  24Ah battery: 2h30min ~ 3h of heating,
  battery BluePower 14Ah: 1h30min of heating,
  battery BluePower 28Ah: 3h of heating.
• works only with the batteries of maximum voltage of 12V,
• safety switch preventing from overheating and too strong current,
• made of Thinsulate™ BZ400 (420g/m2),
• made of fully breathable materials,
• keeps you warm even when heating is switched off,
• regularly distributed heating wiring that allows you a free movement,
• warms up the whole torso, thighs and arms,
• extra pocket for the wire ends,
• waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires,
• additional wires integrated to plug in the heating gloves in standard,
• P-valve holes on both sides in standard,
• two sides pockets,
• water-resistant cuffs,
• tapes which supply air to the dry gloves,
• two-way zip.

specification

SANTI Heated Undersuit Flex 2.0 is designed as part of complex SANTI Heating System which consists of such items as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to use the heating system without any dangers of using the internal battery.

Latest product of SANTI being part of the Heating System, SANTI Heated Undersuit Flex 2.0 with the same inner heating technology as in BZ400 heated model, this undersuit is light and flexible, which increases divers comfort under a drysuit. Made of high quality 180g / m2 Flex fabric with additional insulation of the chest with a double layer of insulation, provides full flexibility of the material on every level which translates into exceptional mobility and smaller volume compared to our model made of Thinsulate insulation. The undersuit contains very efficient heating wires that provide optimal thermal comfort during long and cold dives. In this configuration, most of the generated heat is passed on directly on the diver’s body. We highly recommend this undersuit to those, who look for thinner alternative for a heating undersuit, plan shorter dives in cold waters or long demanding dives in warmer waters.

It is advised to wear the undersuit on top of thin thermal or wool base underwear. Lighter version of the undersuit thanks to new, non-quilted fabric quality provides more warmth towards the body. This generates better thermal feeling and causes heat retention on the body for longer. The Undersuit should not be worn directly on naked skin due to safety and hygienic reasons.

Available sizes:

XS, S, SL, M, ML, MLL, LS, L, LL, LLL, XLS, XL, XLL, XXLS, XXL, XXXL,
Made To Measure option available.

Features:

• maximum heating temperature 45°C,
• maximum heating power: 110 W,
• works with the following batteries:
  24Ah battery: 2h30min ~ 3h of heating,
  battery BluePower 14Ah: 1h30min of heating,
  battery BluePower 28Ah: 3h of heating.
• works only with the batteries of maximum voltage of 12V,
• safety switch preventing from overheating and too strong current,
• Flex 180g/m2 thermal insulation
• made of fully breathable materials,
• keeps you warm even when heating is switched off,
• regularly distributed heating wiring that allows you a free movement,
• warms up the whole torso, thighs and arms,
• extra pocket for the wire ends,
• waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires,
• additional wires integrated to plug in the heating gloves in standard,
• p-valve hose openings on both sides,
• two sides pockets,
• water-resistant cuffs,
• tapes, which supply air to the dry gloves,
• two-way zip,
• elastic waistband.

specification

The Heated Gloves 2.0 are designed as a part of the complex heating system consisting of the gloves, SANTI Thermovalve or SANTI Connector and external battery. This configuration allows a diver to wear the heated gloves under the dry gloves without risks associated with internal batteries.

Available sizes:

XS, S, M, L, XL, 2XL

Features:

• maximum heating temperature: 45°C,
• 36 W power (per pair),
• run time with SANTI battery:
  battery 6Ah: 1h45min ~ 2h of heating,
  battery 24Ah: 9h ~10h of heating,
  battery BluePower 14Ah: 5h of heating,
  battery BluePower 28Ah: 10h of heating.
• keep you warm even when the heating is off,
• evenly distributed heating wiring that allows for free hand movements,
• wires run on the external part of hands and fingers,
• waterproof plug compatible with other SANTI products,
• works with power supply no higher than 12V.

NOTE!
Works only with SANTI Thermovalve and SANTI Connector.

specification

SANTI Heated Vest 2.0 is a product for those who seek the ultimate comfort during long and cold dives.

New Flex 2.0 Heated Vest, designed as part of SANTI Heating System which consists of such components as heated undersuit or heated vest, SANTI Thermovalve or SANTI Connector and external battery supplying the system.
This configuration allows a diver to use the heating system without necessity of using any additional valves and without any dangers associated with internal battery system.

The vest is designed to ensure the top functionality and safety. Thanks to the fabrics used, the vest provides thermal comfort even if your battery is drained.

Made of very flexible Flex insulation fabric with weight of 180g/m2, it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside. The external layer has also windproof properties.

The latest version of SANTI Heated Vest, thanks to new, non-quilted fabric quality provides more warmth towards the body. It generates better thermal properties and keeps the body warm for longer.

Available sizes:

XS, S, M, L, XL, 2XL, 3XL

Features:

• Flex fabric – stretchable threads, resistant to wear and tear,
• weight 180g/m2, isolation: 0.96 CLO,
• side and crotch adjustable, rubber bands to allow best circumference and length adjustment,
• p-valve hose opening,
• maximum heating temperature: 45ºC,
• maximum heating power: 55W,
• battery running time:
  SANTI 6Ah: 1h15min ~ 1h30min of heating,
  SANTI 24Ah: 5 ~ 6h of heating,
  BluePower 14Ah: 3h of heating,
  BluePower 28Ah: 6h of heating.
• safety switch preventing from overheating and too strong current,
• new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking,
• innovative, synthetic power cable resistant to high temperatures and cuts, hidden in a handy pocket,
• ergonomic distribution of internal cables,
• special vest bag included.
• NOTE!
• Works only with SANTI Thermovalve and SANTI Connector.

De superieure warmte van wol met een geavanceerd ontwerp maken samen een perfecte eerste laag voor koude werkomstandigheden of wisselende werkintensiteit Ontworpen voor uitstekende ventilatie en isolatie en geurafstotend voor een fris gevoel gedurende de hele dag 45% Merino Wol, 29% Polypropylene, 24% Polyester, 2% Elastane Wollen terry bij de onderarmen voor meer warmte en ondersteuning Geavanceerd design met ventilatiegaas in de oksel Bij belangrijke delen van het lichaam extra isolatie, bijvoorbeeld rondom de nieren Halve rits voor ventilatie en makkelijk aan- en uittrekken Weerstaat geurtjes op een natuurlijke wijze en kan dagen achter elkaar gedragen worden zonder te wassen

Superieure wollen warmte en een geavanceerd design maken dit de ideale eerste laag bij zeer koude werkomstandigheden Het ontwerp zorgt voor uitzonderlijke ventilatie en isolatie en geeft je een fris gevoel dankzij de geurpreventie De natuurlijke Merino wol voelt extreem zacht en warm in koude weersomstandigheden of bij minder intensief werk 45% Merino Wol, 29% Polypropylene, 24% Polyester, 2% Elastane Behoudt zijn vorm, zelfs na lange tijd wassen en dragen Stoot geurtjes op natuurlijke wijze af en kan hierdoor meerdere dagen achter elkaar gedragen worden zonder te wassen Elastische zomen aan de broekspijpen zijn vormvast en houden de kou buiten Extreem zacht en lichtgewicht materiaal met een brede tailleband voor meer comfort

Mesh technical fabric liner reinforced rubber sole, non-slipAdjustment laces, with reinforced loopsWaterproof collar with safety band.

They must be worn over the neoprene socks that is applied to the drysuits

specification

Drysuit inflation valve with integrated 12V connector.

• Available with APEKS or SI-TECH screw size,
• moveable head equipped with medium pressure connector,
• moveable head provides freedom in optimal and convenient arrangement of the E/O cord and the hose,
• made of two electrical connectors on opposite sides of the cable – used to connect with the battery adapted to underwater usage; and watertight connector to connect SANTI Heating System, exclusively,
• works with power supply no higher than 12V,
• total length of the cable including plugs – approx. 55cm,
• the set include a two piece nut.

Valve placement:

The inflation valve should be fitted on the chest area, where it can be easily reached. The place of fitting the valve needs to be of the right size and the rubber backing patch should be bonded to the outside of the drysuit with a suitable adhesive. When positioning the valve try to ensure that it is not covered by other pieces of diving equipment, affecting access to the valve.

Hose connection:

To mount the medium pressure hose to the end of the SANTI Thermovalve pull down the ring of the hose and slide it onto the end of the SANTI Thermovalve.

Valve operation:

Before each dive it is advisable to check the tightness of the drysuit valves to ensure leak free diving. You cannot dive with too much weight. Choose a safe, shallow place to test your buoyancy. Once in the water, on the surface blow sufficient air into your drysuit by pressing the button on the drysuit inflation valve to provide strong positive buoyancy.

Care And Maintenance:

SANTI Thermovalve works as a regular valve. Also, it allows for collision-free connection of the inner layers of diving gear (vest or undersuit) by means of properly integrated wiring which can be powered by the batteries up to 12V outside the drysuit.

down

Santi Smart Dry Gloves – dry gloves rings system for SmartSeals.

Santi SmartGloves is a self-assembled dry gloves system, compatible with Santi SmartSeals rings system. Its main advantage is the flexibility that allows the diver to put on and take off the gloves effortless. It allows to operate the equipment easier and reach hard accessible places during the dives. Thanks to their flexibility, they can be used by divers with various hand sizes. The system characterizes with an extremely large sealing surface as well as high resistance to mechanical damage and atmospheric conditions.
Santi SmartGloves rings for assembly dry gloves are designed for Santi SmartSeals users.

The Santi SmartGloves set includes:

• mounting ring
• ring cover
• o-ring for dry gloves assembly (thinner)
• locking ring
• sealing o-ring (thicker

In maat S en L

Smaller, lighter, simpler and better, the new Halcyon Balanced P-Valve. The balancer, which was previously bulky attached to the hose, is now integrated into the valve.

Many divers credit Halcyon’s streamline P-Valve with being among their best equipment purchases. The enhanced comfort and peace of mind redefine one’s diving experience. Whether you are interested in a short, comfortable dive or face log decompression obligations, the Streamline P-valve can provide a new level of diving comfort. 

• unique cover allows easy operation even when wearing gloves
• slim design eliminates the need for bulky connections
• the balancing valve is integrated into the solid Delrin body, eliminating the risk of infection from the surrounding water
• the valves have been chosen to create minimal back pressure, which enhances comfort

Verkrijgbaar in verschillende maten

In verschillende maten verkrijgbaar

In verschillenden maten verkrijgbaar

Verkrijgbaar in maat 80mm 90mm 100mm

The changing mat is large enough to be a really useful addition to any diver’s kit with ample room for changing, but extremely packable. Made using the same hardwearing fabric as the bag, the mat can be rolled up and secured using attached elasticated loops.